Welcome Dongguan Gaobu Lyter Safety Shoes Material Factory Official network!
Chinese English

13631716859

News Center

  • Tel:086-0769-88941058
  • Mobile:13631716859
  • E-mail:info@cst66.com
  • Address: No.28-1 East Center Road,Gaobu town,Dongguan,Guangdong,China

Analysis of protective performance of safety shoe steel in Baotou
From: Dongguan Gaobu Lyter Safety Shoes Material Factory Post date: 2018-04-24


The anti smashing performance of safety shoe steel Baotou may be affected by various factors. According to the principle of the protection space in our daily operation, not only the safety shoe steel Baotou must have enough strength, the sole also should be able to form the necessary support strength immediately under the hem of the shoe in the shoe Baotou, so that the impact force can be effectively transferred to the ground without causing the safety sole. The other parts of the ladle, such as ladle, fall into the sole of the shoe after being forced.
1. for this reason, it can be said that if the hardness of the shoe sole formula is relatively large, it will be more effective in supporting shoes in Baotou. Another factor to consider is that when designing, the sole should be kept in line with the edge of the shoe in Baotou, and the sole must have a tooth pattern. This is because the interval between the sole of the sole can not provide good support, so it is possible to avoid the overlap between the Baotou edge of the safety shoe steel and the spacing area of the sole.
2. another shoe sole design feature that may affect the safety of the safety shoe steel Baotou is that the total thickness of the sole is gradually reduced in the direction of the shoe head, which increases the stilt of the shoe head. On the contrary, this will affect the protective performance of the safety shoe steel Baotou. The front of the shoe is tilted forward on the stilts at the time of impact or impact, so that the front shell of the shoe Baotou is lower than the rear edge of the shoe Baotou.
3. because most safety shoe steel Baotou is designed to conduct impact and pressure through its front shell, and if its front shell is lowered to lower than the back edge of the shoe Baotou, its force transfer mechanism will not work effectively, and the rear edge of the shoe Baotou will be severely deformed.
4. also the features of a sole component can also affect the protection of the safety shoe steel Baotou, which is the longitudinal section of the upper surface of the shoe that is cut along the width of the sole. The shoe material in the concave bottom increases the gap between the shoes in Baotou, so the deformation of the shoe Baotou will be greater when it is likely to be hurt.

  • Copyright:Dongguan Gaobu Lyter Safety Shoes Material Factory
  • Tel:086-0769-88941058E-mail:info@cst66.com
  • Address:No.28-1 East Center Road,Gaobu town,Dongguan,Guangdong,China
mobile

mobile

wechat

wechat

H
O
T

Online consulting:

086-0769-88941058